Moisture Seal – Epoxy Water Vapor Barrier
Moisture Seal is a two component, high performance, water based epoxy waterproof vapour barrier membrane to prevent water seepage and permeation from floors, walls, water tanks, reservoirs and water retaining structures.
- 8 Litre kit (10.25 Kgs) Grey. 263370 20 Litre kit (25.6 Kgs) Grey
Apply by roller the first coat at 4-5 M2 / Liter. Second coat at 4 – 5 M2 / liter. Coverage dependent on surface porosity and substrate conditions. Moisture Seal is designed to be applied in two coats to achieve an approximate dry film thickness of theoretically 200 ?m (microns).
- Environment friendly.
- Easy clean – up using water.
- Cured membrane will withstand high levels
- hydrostatic pressure up to 25-meter head of water or 250 Kpa.
- Can be applied to damp surfaces.
- Potable water approval.
- Can be safety applied to freshly laid hardened (green) concrete.
- Non-flammable, negligible odour and toxicity.
- Has excellent adhesion to most substrate including brick, masonry, concrete, block concrete, compressed fiberboard, stone and timber.
- Convenient equal part mixture ratio (by volume).
- Tested to ASTM E 96 for water vapour transmission.
- As low vapour transmission barrier membrane prior to the application of Bostik Ultra set Timber Flooring Adhesive.
- As a low water vapour transmission barrier membrane coating in the building and construction industries and as a barrier coating over “green” freshly laid concrete.
- As a waterproofing membrane, to prevent water seepage or moisture penetration through to the interior of walls and floors.
- As a waterproof membrane, curing compound and barrier coating over freshly laid hardened (green) concrete either as an internal finish or prior to the application of conventional floor and wall coverings such as tile adhesives, carpets or conventional building paints.
- As a waterproofing vapour barrier in tanking applications and sealing over damp concrete surface either as an internal finish coating or prior to over coating with other coatings. A highly tolerant membrane / barrier to prevent water seepage or permeation for floors, walls, water storage tanks or reservoirs and swimming pools.
- Safe to use in sensitive locations (e.g. around food or habitable areas).
- May be used as a waterproof primer prior to the application of Ultraseal, Boscoseal PU, one and two-part polyurethane sealants or cementitious floor screeds.