Seal ‘N’ Flex 1 is a low modulus, one component, Class A polyurethane sealant. When cured it will form a tough, flexible seal capable of cyclic expansion and compression movement of 100% (± 50%) of the original joint width. Seal ‘N’ Flex 1 is virtually unaffected by normal weathering conditions such as rain, sunlight, snow, sleet, ultra- violet radiation, ozone, atmospheric contamination and pollution. Its excellent weather ability enables it to retain its original properties after years of exposure.
Coverage: – The coverage below is the approx. linear meters coverage per pack size.
(300ml cartridge / 600ml sausage).
Calculation formula (W x D X L)/1000 = Litres
W = Width (mm) D = Depth (mm) L = Length (mtrs.)
- Low modulus 100% (± 50%).
- Excellent durability.
- Acoustic rated.
- One component, no mixing required.
- Australian made.
- Colour range.
- Paintable.
- Non staining.
- Sealing Expansion / Construction joints in:
- Insitu Concrete & render.
- Precast and tilt up panels.
- Brick & blockwork.
- Plasterboard.
- Aluminum windows.
- Granite, sandstone and marble.
- GRC, fiberglass & specialty panel systems.
- Metal curtain wall.
- Water tanks.
- Sealing contraction / Longitudinal / Expansion.
- Joints in concrete roads.