Flow fill Grout GP is a pre-packed cementitious grout requiring only the addition of clean water to produce a multi-application non shrink grout at the site. It is a special and unique blend of cements, micro silica, graded sands, water reducing agents and special auxiliary chemical to deliver expansion in the plastic state to compensate for shrinkage. Flow fill Grout GP can be mixed in a range of consistencies by varying the amount of water used to produce a fluid to trowelable consistency grouts.
PACKAGING – Flowfill Grout GP is packed in 30 Kg bags
- Non Shrink: Delivers positive expansion in plastic stage.
- Non segregation: Highly stable segregation free grout.
- Workability: Can be pumped, troweled or poured.
- High early strength: Ensure rapid installation.
- Iron free: No metallic iron is included in the mix as it is capable to introduce future deterioration due to rust expansion.
- Other features: Can be blended with clean local aggregate from 6 mm to 10 mm.
- Chloride free: Good early strength development without the use of chlorides.
- Precast and pre stressed panels.
- Grouting in column base, base infilling.
- Filling core holes, rod holes and defects in concrete.
- Fill in grout for hollow block walls.
- Joints between precast panels and other joints.
- Tile slab panels.
- Caulking of joints and pipes.